Home Products Latest News
Tech Info Contact Us Distributors
 
Strain Relief Union
Cottage Life Article
Buyers Guide Article
Quick Disconnect Union
Poly-Pipe Range Additions
 
 
 

The HANFLO™ Quick Disconnect Union provides a quick & easy connect or disconnect where a straight connector isn't suitable. The poly end union is purposely used for repeatedly connecting or disconnecting poly pipe (via an unwindable centre nut) at the water's edge or anywhere you are reconnecting poly pipe to poly pipe. It also has the added advantage of providing strain relief where required with it's unique "knuckle" ability.
The result is the capacity to connect and disconnect pipe work or valving quickly and easily without the hassle of having to shift large equipment or existing installations. Our commitment to new and innovative products to give installers and home owner's a fast, hassle free installation has been our motivation to launch this new HANFLO™ Quick Disconnect Union.

The HANFLO™ Quick Disconnect Union works with all HANFLO™ fittings and valves.

The HANFLO™ Quick Disconnect Union provides a total movement of up to 9 Degrees.
Unwinding the centre nut allows for easy connect & disconnect from large equipment and existing installations, providing the ultimate flexibility where needed.
HANFLO
CODE
SIZE
PRICE
EXAMPLE
KU20PP-SI
KU20PP-100
3/4” Poly x 3/4” Poly
$16.75
KU25PP-SI
KU25PP-100
1” Poly x 1” Poly
$17.50
KU32PP-SI
KU32PP-100
11/4” Poly x 11/4” Poly $18.50
Poly end unions are available in either SI or 100 formats.
SI fittings are designed to connect to standard grade 75psi, 100psi & CSA grade 75psi poly-pipe. 100 fittings are designed to connect to 100psi CSA grade poly-pipe.

Prices are In Canadian dollars and are subject to change without notice.

  • Pipeline can easily be removed or installed from pump for servicing or winterizing.
  • Pump can be off centre from pipe work by a total of 9 degrees.
  • Works with the extensive range of HANFLO™ Poly - Pipe Fittings.
  • Cold fit – Fast fix – No heating of pipe required.
  • Manufactured from Corrosion Resistant High Quality Glass Fibre Reinforced Nylon.
  • Maximum Working Pressure; 10 Bar (1000 KPA. 145 PSI) @68°F.
  • Suitable for many types of fluid. Ask your dealer for details or contact HANFLO™ on 866 270 2552 or www.hanflo.com
  • All pipe work must be adequately supported.
  • HANFLO™ have tested all its products for use with cold water up to a maximum temperature of 60°C (140°F), We do not recommend the use of these products with temperatures higher than 60°C (140°F) as plastic expands due to temperature increases under pressure. HANFLO™ can not guarantee the products will perform when used with temperatures over 60°C (140°F). HANFLO™ products that have failed in temperatures higher then 60°C (140°F) will not be covered by warranty.
TO TECH INFO BACK TO POLY MAIN